Professional Shower and Bathtub Installation in West Columbia, SC services.
A beautiful new shower is only as good as the plumbing behind it. A drain set at the wrong depth can let sewer gas into your bathroom. A pan liner installed incorrectly can fail within a few years and rot the floor beneath your new tile. An outdated valve can send a blast of scalding water the moment someone flushes a toilet. These problems are hidden behind walls and under floors, which is exactly why they are so expensive to fix after the fact. Merritt Plumbing provides professional shower and bathtub installation in West Columbia, SC, handling the rough-in, valves, drains, and finish trim so your new bathroom works as well as it looks.
Types of Shower and Tub Installations We Handle
Whether you are replacing an old tub, building a custom shower, or renovating a full bathroom, we handle the plumbing side of the project. Our installations include:
- Walk-in showers
- Soaking tubs
- Whirlpool tubs
- Tub-to-shower conversions
- Custom tile showers, including the shower pan liner
- Custom bathing solutions tailored to your space
We also remove and replace old fixtures as part of the job, and design assistance is available if you are still deciding what will work best in your bathroom.
What Our Shower and Bathtub Installation Includes
A proper installation happens in two stages: the rough-in, which is hidden in the walls and floor, and the finish, which is what you see and use every day.
Shower and Tub Rough-In Plumbing
The rough-in sets the foundation for everything else. It includes:
- Supply lines to the new valve, resized when needed
- Drain location, relocated when the new layout requires it
- P-trap installation at the correct depth
- Valve body installation
Finish Plumbing and Trim
Once walls and tile are complete, we return to install and test:
- Valve trim
- Showerhead arm
- Tub spout
- Drain assembly
Shower Pan Liner Installation
For custom tile showers, the pan liner is the waterproof barrier under the tile. We install the liner and coordinate timing with your tile contractor so each trade works in the right order.
Shower Valve Installation and Code Requirements
The shower valve controls water temperature and pressure, and it is one of the most important safety components in your bathroom. We install pressure-balancing or thermostatic valves as code requires.
Why does this matter? Shower valves without pressure-balancing protection do not meet current code and create a scalding risk. When someone flushes a toilet or runs a faucet elsewhere in the house, an older valve can let the water temperature spike suddenly. A modern pressure-balancing or thermostatic valve protects against that.
Tub-to-Shower Conversions in West Columbia, SC
Many homeowners want to replace a rarely used bathtub with a walk-in shower. Tub-to-shower conversions are one of the most popular projects we handle, but they often involve more than swapping one fixture for another. Depending on the new layout, a conversion may require relocating the drain. In homes on a slab, that can mean cutting concrete to reach the drain line, which adds to the cost. We will explain exactly what your conversion requires during the walkthrough, before you commit to anything.
Common Installation Problems We Prevent
Much of the value of a professional installation is in the problems you never have to deal with. Here are a few of the issues we watch for and correct:
- Incorrect P-trap depth. A P-trap set at the wrong depth can allow sewer gas into the bathroom.
- Improper pan liners. An incorrectly installed shower pan liner can fail within two to three years, causing hidden water damage under the floor.
- Undersized supply lines. Supply lines that are too small cause a pressure drop when the shower runs at the same time as other fixtures. This is especially important for multi-head shower systems, which may need upsized lines.
- Undersized drain lines. We identify and correct drains that are too small for the new fixture.
- Old cast-iron P-traps. We replace aging cast-iron traps during renovation, when they are easy to reach.
- Outdated valves. We replace valves that lack pressure-balancing protection.
Catching these during installation costs far less than tearing out finished tile to fix them later.
Our Shower and Bathtub Installation Process
Here is what to expect when you work with Merritt Plumbing:
- Walkthrough. We visit your home to review the space, the existing plumbing, and your plans.
- Written estimate. You receive a written estimate after the walkthrough.
- Permits. We pull permits when required by Lexington County.
- Rough-in. For new construction or full gut renovations, we set the rough-in plumbing before walls and tile go up.
- Leak testing. We leak-test all connections before tile work begins.
- Coordination with your contractor. We schedule our work around your general contractor’s tile timeline.
- Finish trim and testing. We install the finish trim and test everything at project completion.
For simpler replacements, most installations are completed in a single visit whenever possible. New construction and full renovations require a return visit for the finish trim once walls and tile are done.
Supporting Long-Term Reliability and Efficiency in West Columbia, SC
Elevate your bathroom’s performance and sustainability with modern, water-efficient shower systems and bathtubs in Columbia, SC. Today’s advanced fixtures are engineered to conserve water without compromising on a strong, comfortable flow or reliable temperature control. Merritt Plumbing in Columbia, SC, specializes in helping homeowners select fixtures that not only meet their performance needs but also significantly lower utility costs and enhance overall usability. Investing in water-efficient upgrades offers environmental benefits, reduces wear on your plumbing system, and lessens the burden on your water heater.
Ensuring the long-term reliability of your bathroom depends on ongoing system maintenance and expert installation practices. Merritt Plumbing is dedicated to providing durable solutions in Columbia, SC, that boost performance, safeguard your home’s structure, and offer lasting peace of mind.
Experience precise installation for consistently stable water pressure and comfortable temperatures.
- Benefit from advanced leak prevention through secure connections and robust waterproof sealing.
- Upgrade to modern, water-saving fixtures designed for maximum efficiency.
- Ensure protection for your walls, floors, and surrounding plumbing infrastructure.
- Achieve long-term reliability and enjoy reduced maintenance expenses.
Frequently Asked Questions
Can you convert my bathtub into a walk-in shower?
Yes. We handle tub-to-shower conversions. Depending on the layout, the drain may need to be relocated, which can involve cutting concrete in slab homes.
How long does shower or tub installation take?
Most installations are completed in a single visit whenever possible. For new construction or full renovations, we set the rough-in before walls and tile go up, then return to install the finish trim once the tile is complete.
Do I need a permit to install a new shower or tub?
Permits are required for some projects. We pull permits when required by Lexington County, so you do not have to handle it yourself.
What type of shower valve do I need?
Current code requires a pressure-balancing or thermostatic valve. Valves without pressure-balancing protection create a scalding risk when water is used elsewhere in the home.
Do you install tiles?
Our work covers the plumbing side of the project, including rough-in, valves, the shower pan liner, and finish trim. We coordinate our schedule with your tile contractor so the work happens in the right order.
Do you remove the old tub or shower?
Yes. We remove old fixtures and replace them as part of the installation.
Schedule Your Shower and Bathtub Installation in West Columbia, SC
Your new bathroom deserves plumbing that is installed right the first time, before the tile goes up and the problems get buried. Whether you are planning a walk-in shower, a soaking tub, or a full bathroom renovation, Merritt Plumbing is ready to help.
Call Merritt Plumbing at 803-254-7542 or contact us online to schedule your walkthrough and free estimate. Our licensed, family-owned team will make sure your new shower or tub works as well as it looks.